汇旺彩票|
SiteMap| FeedBack| 中文

深圳市光普达科技有限公司

Service HotlineLin
sales@

Recommend Product

Contact Us

T:+86-755-81473975

F:+86-755-28176844

E: sales@

A: 3F Building 1, Yuxiu Industrial Zone, No. 95 Yuchang Road, 

Liuhu Community, Guanlan Street, Longhua District, Shenzhen

Introduction of new product three in one 350W light beam lamp

Article Source:PoweredPopularity:4586Addtime:2017/7/16 21:29:48SmallInLarge

YBS-350 is Shenzhen Sunpro Technology Co. Ltd. to build a strong and a head light beam (Fig. 1), compared to pure YB-350 light, R & D personnel fully listen to the opinions and suggestions of users, the product still maintained the original shape and lighting power, optimization of the pattern wheel, color plate configuration, and upgrades software performance, complete function, the beam pattern, the three dyeing effect, low operating noise.
Following are the advanced features of the YBS-350 three in one shake head beam lamp.
Light source and heat dissipation system
The lamp is equipped with excellent lamp halogen cup, it is still a short arc, platinum series lighting, relative domestic lighting, we found that both brightness, color temperature and color, X8 lighting has improved significantly, which makes the lamp more suitable for TV, theater and other high-end places, and the arc length by 1.3mm for the 1.2mm, and the focal length is shortened from 31mm to 37.4mm, the projection beam lamp is more uniform and more concentrated.
The cooling system, the light source is a positive 90*90mm axial flow fan (Figure 3.1) for the heat dissipation of the entire light source and light source lamp, the left side there is a small turbo fan (Figure 3.2) on the front end of the light source of heat, through the air duct guide air through the heat insulation piece and the front end of the light source area, and in two the fan outlet are equipped with temperature sensors, controlled by software control, the lamp temperature is maintained in the appropriate range; in order to ensure the normal work of the color and pattern plate, the lamp also uses a 60*60mm axial flow fan (Figure 3.1) to the color wheel and pattern plate cooling.
Two, color and pattern system
Fixed color wheel (Fig. 4) installed in the pattern and the color wheel assembly (Figure 7), it contains 14 pieces of adhesive in the Aluminum Alloy disk ladder two to the color filter, are orange, green, dark red, dark green, light green, purple, pink, yellow, magenta, blue, green, CTO2 CTO1, CTB, blue. The color wheel rotating smooth operation, one week only the fastest 0.2S, bi-directional rotation, semi color, water and rainbow effect.
The rotary pattern panel (Fig. 5) comprises 12 patterns and 1 white light holes, wherein the pattern comprises 8 metal pattern pieces and 4 Glass pattern pieces, and the pattern effect is more abundant, and the utility model can better satisfy the user's requirement. The design piece is pressed on the pattern rotating gear by a pressure spring, and the rotating gear can be inserted and pulled out to facilitate the user to change the pattern piece.
The fixed pattern wheel (Fig. 6) is distributed with 17 rich patterns, and can rotate in two directions. The patterns can be switched instantaneously, and the positioning is accurate and the patterns are sharp. Four white light holes with a diameter of 1-4mm can produce a beam of 0-4 degrees.
Three, dimming and strobe
Light reduction and strobe (Figure 7), this device is a pair of jagged double open flag shaped pieces, two pieces of flag shaped by a motor control, used to block light. By controlling the opening and closing speed of the flag film by software, the light reduction and strobe function can be realized. Light down, smooth and supple, and neat when flashing. Strobe frequency range of 1~13 times / sec, can create a regular strobe effect, as well as random strobe effect, but also to create a pulse strobe effect.
Figure 7
Four, double stack prism
The prism assembly (Figure 8) contains 1 independently rotating prism eight and 1 independently rotating five gradient mirror, the two can be used separately and superimposed on each other, once the superposition in place, forming a plurality of pattern images, the effect of brilliant, it can rotate with the speed of change, the effect of fluctuations such as water, form multi level picture, close to the 3D effect. Both the rotating eight prism and the five gradient mirror have a good image separation effect, and the aerial beam is more dazzling and full of effect.
Figure 8
Five. Optical system
The YBS-350 lens is the optical lens diameter of 158 (Figure 9), the output light beam clean, thick, high light efficiency (Figure 10), the large size of the lens is very suitable for projecting a beam of light. The lens is driven by two wire motors, which can move back and forth and play a focusing role. The lens can make a precise linear motion at the right speed, and the whole speed is only 1.5S.
Figure 9
Figure 10
Six horizontal and vertical rotation
The horizontal and vertical rotation ranges of the luminaire are 540 degrees and 270 degrees respectively, and a horizontal rotation of 360 DEG is needed only 2.2S, and the vertical rotation of 270 degrees is only 1.5S. The horizontal and vertical rotation are driven by three-phase motors. The operation is fast, accurate, smooth and low noise.
Seven, atomization effect
An atomizing mirror with a diameter of 60mm (FIG. 11) is arranged in the prism assembly (Fig. 8), and when the atomizing effect mirror is cut, the output light effect is equivalent to the dyeing lamp of the 575-700W metal halide light source.
Figure 11
Eight, modular design
The whole lamp adopts modular design, and the lamp body is divided into a bulb assembly, a prism, a design disk assembly and a focusing lens component, and the modular design makes the process of the lamp more beautiful and coordinated, and is easy to install and maintain.
YBS-350 extends the superior performance of YB-350, adds color patches and fixed pattern plates, and provides more choices for customers. It is a lamp with light beam, pattern and dyeing function. The whole lamp weight is 25Kg, easy to install, carry, operate and hang. It can be installed in any location: test stand, TV station, studio, various stage, exhibition hall or conference room. At the same time, the compact size also reduces the space occupied by the lamps and lanterns, and saves transportation and storage costs.
Copyright@2004-2018 All rights reserved.  粤ICP备13058018号-1
Show
友情链接: